As the title says this is a titanium rear wheel spindle and suspension mounting bolt for a Harley Davidson, not sure which model, but it’ll be from a heavy one. I love making these big axles, they are really hard work, tricky and riddled with the opportunity to scrap well over £100 worth of titanium at every stage of production, […]
The one on the left is titanium, the one on the right is 7075 alloy, the titanium one is the bearing tensioner that goes under the top yoke, the 7075 one holds the yoke down. Yum.
Cheese is one of my favourite foods, but having a brain made from the Swiss variety gets frustrating! Here’s a pair of titanium rear spindles with 7075 alloy nuts but I can’t remember what they are for! Over the summer I didn’t photo everything I made as I was getting a backlog of parts photo’s waiting for the oomph to […]
These are titanium valve spring retainers, can’t remember what bike they are from as i made them some time ago. To cut the collett angle I have cutters ground to the correct angle, but they don’t last long!
A while ago I made these titanium brake bolts and 7075 alloy catch washers and nuts for a set of early Shimano brakes for a pedal bike. The bike is about 25 years old I think so all the brake parts are unobtainable as well as bent!
Here’s a couple of titanium sidestand or ‘kickstand’ bolts I’ve made. Apart from being light and strong, always a bonus on a motorcycle, they are incredibly corrosion resistant, more so than stainless steel, so they are ideal to be tucked away where they can be seen, get all the road much and salt etc but difficult to keep clean. […]
These are titanium early Yamaha R1 gearbox sprocket nuts and washers. I’m not sure what year Yamaha changed these nuts, but more recent models have very different ones, theres some further down the blog if you feel like having a scroll!
These are a pair of titanium swinging arm spindles and nuts for racing Quad bikes i made some time ago. Very straight forward, nothing unusual or complex about them, just functional items of joy! I haven’t done much for Quad bikes, i don’t know whether titanium hasn’t caught on with them yet or just isn’t needed on them, though the […]
These are titanium wheel spindles for a racing Norton, the nuts and washers are 7075 alloy. The rear axle is a bit thin to bore lengthways, it would have taken a 5 or 6mm hole but the cost to weight advantage just wasn’t worth it in this case so i left it solid, still 40% lighter than original. The front […]
Although I don’t make titanium sprocket drive pins for HPS any more (they have them CNC turned by Probolt as its cheaper for them), some people still prefer hand made with love items so they come to me. Here’s a set now…