Its been a while since i posted any work on my blog, thats because i’m in the middle of a shed load of small parts, then lightning strike knocked out my broadband connection for 5 days and then it was xmas! So for any titanium starved addicts who get their fix from my blog i’m sorry there hasn’t been any […]
Here’s a few more titanium parts for a Suzuki GSXR1000 K6 to go with the axle set i made a couple of weeks ago. There’s a lot more to come yet. The titanium handlebars are to fit Gilles gp type clip ons, the originals are alloy but my customer prefers titanium, there is the added bonus of super protection if […]
This is the 7075 alloy bearing spacer and shims for the Yamaha TZ.
This is what i’ve been working on all week, a set of titanium wheel and swinging arm spindles with 7075 alloy nuts for a TZ Yamaha. There is a 7075 alloy wheel spacer and 2mm thick shims which i will post separately later. I’ve just recently had to buy a new drill sharpening machine as my old one was dead, […]
Here’s a titanium wheel and swinging arm spindle set i’ve just made for a Suzuki GSXR1000 K6. They are BIG! Hard work to make but i’m really pleased with the way they’ve turned out.
These are titanium spacers to space out the power head on a racing speedboat. I made the bolts for it a few weeks ago which seem to work very well but the additional strength in them means the existing alloy spacers crush (rather than the bolts break), so we’re trying titanium ones.
These are titanium rear wheel and swinging arm axles for a Triumph T140 engined cafe racer. Long they are too!
Recently I made an alloy steering damper knob and titanium rod for a BSA RGS. Last night the customers son emailed me with a photo of it fitted, it looked so good I thought i’d put it on my blog.
Here’s a set of titanium engine mounting studs for an erm…… those car parts scrambled my brain and i can’t remember anything any more! Thankfully I can still remember that perfection is my goal. The M12 stud is on a 1/2″ shaft making it much quicker and easier to produce as 1/2″ is stock bar size so there was no […]
These are 7075 alloy anti roll bar links i think. They are for the same car as the previous blog. I’m not very helpful am i? But at the end of the day i don’t actually need to know what the parts i’m making will be fitted to (as long as its not for nefarious activities, in which case find […]