Titanium 7/16 UNF bolts
I’ve been found out by car owners! I’ve got a few jobs for cars in at the moment, here’s one of them. They are 7/16 UNF and hold something on to somethings else to stop something falling off! sorry i can’t be any more specific than that, not because its secret but because its for a car, so what do i know?!
The bolts run through bushes, the original bolts were quite a sloppy fit so i made a sample with a just exactly perfect shank which slid through the bushes beautifully with no discernible play, but it wouldn’t fit through the hole in the chassis! so i ended up making them to the same tollerence as the originals as it would have been a gargantuum task for my customer to ream out the holes slightly, he’d have had to pull his car in bits! So sometimes it doesn’t matter how good i can make something or how much improvement over the original i can gets things, there will be other factors that i have no control over which dictate a shoddy job!
The long bolts are 101mm long, the short ones 63mm long.


4 thoughts on “Titanium 7/16 UNF bolts”
Leave a Reply
You must be logged in to post a comment.
Hi there. Would it be possible for you to make the the following in Ti UNF for me?
7/16 x 4 @ 20mm long
1/2 x 2 @ 25mm long
I can send samples of both in steel to make sure they are (me!) correct
Regards
Paul
Hi there. Would it be possible for you to make the the following in Ti UNF for me?
7/16 x 4 @ 20mm long
1/2 x 2 @ 25mm long
I can send samples of both in steel to make sure they are (me!) correct
Regards
Paul
Hi can you price for me
2 x 7/16 unf @64mm long
2 x 3/8 unf @50mm long
4 x 3/8 unf @40mm long
Thanks Gary
Hi can you price for me
2 x 7/16 unf @64mm long
2 x 3/8 unf @50mm long
4 x 3/8 unf @40mm long
Thanks Gary