Yamaha R1 titanium, jolly nice bits!
It came to pass that i finished the latest batch of R1 titanium parts. There are a couple of pieces still to do that i am waiting for the tooling and bar to do them, namely a sprocket nut and steering stem collar nut.
So this is what i’ve done to go with the clutch actuator shaft and pickup bolt:






For the starter motor bolts I had to use 1/4″ dia bar as 6mm is no longer available via my supplier, so they aren’t quite as light as they could be and will hopefully still fit down the hole! which is measured at 6.5mm so they should.
Pete
0