Honda TLR 250 7075 alloy wheel spindles and fittings

These are the front and rear wheel spindles for a Honda TLR 250, along with some suspension bushes and clutch line fittings. The front axle is only 12mm diameter so its too skinny to drill, the rear is 15mm dia so i popped a 1/4″ hole through it.

The clutch fittings are to suit Hope bicycle hydraulic brake lines, these weigh next to nothing and with a simple fitting are a major advance on OEM. I made 2 in 7075 alloy and 2 in titanium.

The suspension bushes are to modify an aftermarket suspension unit for use on Montessa’s.

Honda TLR 7075 alloy axles and fittings
Honda TLR 7075 alloy axles and fittings
Honda TLR 7075 alloy rear axle head
Honda TLR 7075 alloy rear axle head
Honda TLR 7075 alloy front axle head
Honda TLR 7075 alloy front axle head
Honda TLR 7075 alloy rear axle thread, M14x1.5
Honda TLR 7075 alloy rear axle thread, M14x1.5
Honda TLR 7075 alloy axle nuts
Honda TLR 7075 alloy axle nuts
7075 alloy suspension bushes
7075 alloy suspension bushes
7075 alloy and titanium hydraulic fittings
7075 alloy and titanium hydraulic fittings
7075 alloy and titanium hydraulic fittings, M10x1 thread
7075 alloy and titanium hydraulic fittings, M10x1 thread
7075 alloy and titanium hydraulic fittings, 2mm bore
7075 alloy and titanium hydraulic fittings, 2mm bore

 

Leave a Reply