Titanium 1/2″ UNF engine and swinging arm studs

Here’s a couple of 1/2″ UNF titanium studs i’ve just made, one is for a swinging arm and the other is an engine mounting stud. Happily the swinging arm stud passes through sleeves which were bored on the generous side so the stock bar fitted after a polish with emery without he need to skim it to size, which over that length would have been impossible using stock 1/2″ bar, i’d have had to turn it down from 16mm bar.

Titanium 1/2" UNF swinging arm and engine mounting studs
Titanium 1/2" UNF swinging arm and engine mounting studs
Titanium 1/2" UNF threads
Titanium 1/2" UNF threads

Leave a Reply