Montessa titanium swinging arm spindle and suspension bolts

H&D Racing need another swinging arm spindle and 3 sets of suspension bolts for Montessa’s. They are quite popular, I think Marks trials buddies have cottoned onto titanium for its strength and lightness!

They are a nice set to make, the swinging arm shaft takes a bit of time to get just right, its 13.95mm diameter turned from 7/8th bar so there’s a fair bit to chew off. This one is for the two stroke model which is about 15mm longer than the four stroke.

Montessa titanium swinging arm axle
Montessa titanium swinging arm axle
Montessa titanium swinging arm axle head
Montessa titanium swinging arm axle head
Montessa titanium swinging arm axle drilled hollow
Montessa titanium swinging arm axle drilled hollow
Montessa titanium swinging arm axle nut
Montessa titanium swinging arm axle nut
Montessa titanium suspension bolts
Montessa titanium suspension bolts
Montessa titanium suspension bolt head
Montessa titanium suspension bolt head
Montessa titanium suspension socket cap bolt head
Montessa titanium suspension socket cap bolt head

Leave a Reply