Suzuki TL1000 titanium drive sprocket nut

This is a titanium drive sprocket nut for a Suzuki TL1000. The OEM setup is a plain nut and washer, so i’ve combined the two into a flanged nut. The back is relieved out to fit over the output shaft, and it has 1 lockwire hole like the Yamaha R1 drive sprocket nuts.

Its 27mm spanner size and 20×1.5mm thread.

Suzuki TL1000 titanium drive sprocket nut
Suzuki TL1000 titanium drive sprocket nut
Suzuki TL1000 titanium drive sprocket nut undercut
Suzuki TL1000 titanium drive sprocket nut undercut
Suzuki TL1000 titanium drive sprocket nut lockwire hole
Suzuki TL1000 titanium drive sprocket nut lockwire hole

Leave a Reply